Verification
Sodatide batch verify: the lot, and what it proves
The stock this site holds carries lot SOD-26/SO-3431 and certificate reference SOD-3431-26-SO. The lot and certificate references supplied with this stock are draft label values, not laboratory proof. No certificate of analysis document has reached this desk, and a reference string is not a document. No certificate of analysis document exists for this desk to show you, and the order desk cannot supply one either. This page sets out what the bottle prints, what each marking proves, the six things a certificate would have to contain before we described one as existing, and six checks to run on the bottle you were sent.
By the Sodatide Editorial Desk · Medically reviewed by Dr. Meetal Mehta, Physician · Revised
The bottle
What is actually printed, and what a batch check can use
Select a number to read what sits at that point. Two of the six are about what is absent, because the absences decide what a verification can do here.
Select a number on the bottle, or use the arrow keys.
Advanced Metabolic Science
The eyebrow line above the wordmark. It is a phrase rather than a claim about a batch, and the label names only the distributor beneath it, not the factory a lot code would normally be traced to.
The wordmark
Sodatide, with a trademark mark. A brand name identifies who is selling something; it does not identify what is in the bottle, and on this label nothing else does either.
Metabolic and Digestive Support
The support line, carrying the asterisk that leads to the Food and Drug Administration disclaimer. A category, not a batch record, and not a statement any test could confirm.
30 capsules, the count you can verify
The one printed quantity you can check yourself the moment the bottle is open. At 1 capsule that is 30 days, and it is the only arithmetic this label supports.
Dietary Supplement, and the 30-day supply line
The statement of identity and the supply claim. NCCIH notes that many probiotics are sold as dietary supplements, which do not require FDA approval before they are marketed, which is why batch records matter here rather than less.
Where a lot code and a date would be read
Lot SOD-26/SO-3431 and certificate reference SOD-3431-26-SO came with this stock as draft label values. No best-before date appears on the label artwork; the Supplement Facts panel sits on the side of the bottle.
Batch verification normally means holding three things against each other: a lot code on the bottle, a certificate of analysis for that lot, and a declared amount for the certificate to be measured against.
On Sodatide the first exists and the other two do not. Lot SOD-26/SO-3431 and certificate reference SOD-3431-26-SO came with this stock. The lot and certificate references supplied with this stock are draft label values, not laboratory proof. No certificate of analysis document has reached this desk, and a reference string is not a document.
This page will not describe that certificate, summarise it or say what it shows, because nobody has given it to us. A reference string is a pointer, and a pointer with nothing at the end of it is not proof. Neither this site nor the order desk can supply a document that has never existed for us.
What is left is still worth having: a code that tells you whether the bottle in your hand is the batch these pages describe.
Every marking
What each one proves, and what it does not
| Marking | Value | What it proves |
|---|---|---|
| Lot | SOD-26/SO-3431 | A draft label value supplied with this stock. It identifies a batch and proves nothing about what is in it. |
| Certificate reference | SOD-3431-26-SO | A reference string, not a document. No certificate of analysis has been supplied to this desk and we have not seen one. |
| Capsule count | 30 | The one declared quantity you can verify with your own hands. Count them. |
| Storage instruction | The label says refrigerate for optimal quality and keep away from heat, light and humidity; the brand adds that an opened bottle belongs in the fridge. | Printed, and specific. It is also the only handling instruction on the bottle. |
| Best-before date | not published | None is printed, which is why the lot code carries the whole burden of identifying your batch. |
| Probiotic strain codes | not published | Three species are named but no strain code and no CFU count, so an identity test could be checked against the species only. |
| Manufacturer | not published | The label names the distributor, Instituto Experience of Lakeland, Florida, but no factory, so the lot code cannot be traced to a facility. |
| Supplement Facts panel | not published | There is none, so no declared amount exists for a laboratory result to be measured against. |
Four values and four blanks. The values identify a batch and describe how to store it. None of them says what is in it.
What a certificate would have to contain
Six things, before this site would describe one as existing
This is not a wish list. It is the ordinary content of a certificate of analysis, written out so a reader can tell the difference between a document and a string.
The laboratory, named
Which lab ran the tests, where it is and what it is accredited to. An unnamed lab on a certificate is the same problem as an unnamed factory behind a bottle: nobody to ask.
The lot it belongs to
A certificate is about one batch. It has to carry the lot code it tested, and that code has to be the one printed on the bottle in your hand.
Methods and limits, per analyte
What was tested for, by what method, and what the pass limit was. Heavy metals, microbial counts and identity testing are the usual set, each with its own result rather than a single word like passed.
Organism identity and a CFU count
The two things a probiotic certificate exists to state: which organisms were found, to strain level, and how many colony-forming units per serving were counted, on what date.
Results against declared amounts
Where a certificate for Sodatide would hit the same wall as everything else. Nothing is declared on the label, so an assay result would have nothing to be measured against.
A date, a signature and a way to ask
When the tests were run and who signs for them. A certificate that exists only as a picture on a sales page is a picture; one that can be requested by quoting a lot code is a record.
The fourth and fifth are the ones specific to this product. A probiotic certificate states which organisms were found and how many of them there were; a label with a panel then gives you a declared figure to hold the result against. Here there is neither, so even a full certificate would confirm what was in a batch without confirming it matched what the buyer was told.
Your bottle
Six checks, and what to do when one fails
Read the lot code
Compare it with SOD-26/SO-3431. A match means these pages describe your batch; a mismatch means they describe a different one.
Count the capsules
The label says 30, and this is the only declared quantity you can verify with your own hands.
Read the front and the panel
Advanced Metabolic Science, the wordmark, the support line, 30 capsules, Dietary Supplement and 30-day supply on the front; 211 mg, 100 mg and 36 mg on the Supplement Facts panel at the side. That is the whole printed record.
Match the panel
The Supplement Facts table should list 211 mg, 100 mg and 36 mg, name Bifidobacterium infantis, Clostridium butyricum and Akkermansia muciniphila, and print no CFU figure. A bottle that has one is not the bottle described here, and we would want to hear about it through the website desk.
Check the bottle, the seal and the fridge
Condition and seal first, then storage: the label asks for refrigeration for optimal quality, and the brand wants an opened bottle kept in the fridge.
Keep the order email
It carries the order ID and the tracking, the two things the desk asks for on any call about a batch.
When something does not line up
Call the order desk with the order ID and the lot code from the bottle. It can see what was shipped to you. The hours the order desk keeps are not published. Nothing supplied with this stock states them, so this site prints the number and leaves the opening times blank rather than inventing a working day.
If the mismatch is a printed amount or a strain name appearing where this site says there is none, write to the website desk as well. That would be new information about the label.
Two things this page cannot do
It cannot confirm any batch was tested, because no test document has been supplied. And it cannot check a result against a label claim, because the label makes no quantitative claim at all.
Check the lot before the first capsule
The stock this site describes is lot SOD-26/SO-3431. Two bottles is $158 plus $9.99 shipping for 60 days, with a 60-day money-back window and the order desk.
Order desk: listed in the footer · opening hours not published
Questions
Sodatide batch verify: common questions
What is the Sodatide lot number?
Can I see the certificate of analysis?
The lot on my bottle is different. Is that a problem?
Is there an expiry date to check?
Does a lot number mean the product was tested?
Can I verify the bottle against the Supplement Facts panel?
What should I actually check on arrival?
References
- National Center for Complementary and Integrative Health. Probiotics: What You Need To Know. https://www.nccih.nih.gov/health/probiotics-what-you-need-to-know
- U.S. Food and Drug Administration. Questions and Answers on Dietary Supplements. https://www.fda.gov/food/information-consumers-using-dietary-supplements/questions-and-answers-dietary-supplements
Every source above was opened and read on September 30, 2026. None of them tested Sodatide itself. They describe the named ingredients and the product category, which is a different thing from testing this finished formula.